Tel.: +359 894 765 106
e-mail: office@aqua-tech.bg
Sewage pipes ECOpipe-K
Smooth wall HDPE 100 or HDPE 100RC pipes for pressure sewerage ECOpipe-K

Along with the improvement of technologies, there is also an increase in chemical waste, which contains increasingly aggressive substances.
Considering the particular composition of sewage water and chemicals, polyethylene piping systems are the most acceptable and efficient solution due to their resistance to chemicals, erosion and corrosion.
Sewage pressure pipelines made of PE for underground and above-ground sewers have proven themselves for more than 40 years.
PE pipe systems are absolutely leak-proof, which is the result of the welding connection method used, which guarantees the stability of the entire system. The high modulus of elasticity of PE fully meets the requirements of sewage systems.
ECOpipe-K pipes are designed for pressure sewerage, deep-sea outfalls, industrial and other water and fluid transmission systems.

S – Pipe series
SDR – Standard Dimension Ratio (Ratio between nominal outside diameter and wall thickness)
PN – Nominal pressure, in bar
Dn – Nominal outside diameter, in mm
Weight – Kilogram per one meter of pipe
Material: High-density polyethylene HDPE 100, HDPE 100RC
Dimensions: From ø16 to ø630 mm
Pressure ratings: From PN4 to PN25 bar
Marking: Every meter of length, in a color contrasting with the pipe color (e.g., white). The marking complies with BDS EN 12201-2:2024.
Coloring: Black pipe with four brown longitudinal stripes, UV stabilized
Standard: BDS EN 12201-2:2024
Note: The pipes can be manufactured in lengths other than the standard ones




Double Wall corrugated pipes for sewage
Intended for the construction of outdoor and industrial sewage systems for waste and rainwater

Material: HDPE and PP
Structured Wall - ribbed outer and smooth inner surface
Pipe length - 6 m
SN - Class of hardness (resistance to pressure)
SN 4 = 4 kN/m2
SN 8 = 8 kN/m2
Standard: BDS EN 13476-3


Spiral pipes
Spiral pipe has all the technical advantages of solid-walled polyethylene pipes, but achieves significant weight savings, easier installation and higher efficiency. The production technology guarantees the pipes high stiffness and resistance to internal pressure. Suitable for sewage systems with large diameters, irreplaceable innovative trenchless technology.

Material: HDPE and PP
Structured Wall - ribbed outer and smooth inner surface
Pipe length - 6 m
SN - Class of hardness (resistance to pressure)
SN 4 = 4 kN/m2
SN 8 = 8 kN/m2
SN10=10 kN/m2
Delivery: pipes up to 2400mm



